President Trump knew everything that was to take place. He told us he would be not be seeing him for a while. In his speech to Whirlpool on August 7th, 2020. He layed out a lot of clues as to the nature of the cabal and political middle men. Listen closely what he says in […]
REMEMBER TO CLICK THE LINK AT THE BOTTOM TO OPEN THE WHOLE PAGE.
Mike Lindell announces the new Social Media Site for everyone to speak their opinions. No more censoring for opinions that are different. No more supression of the First Amendment he is bringing back free speech for everyone, not just one side. Mike Lindell’s interview with The Christian Broadcasting Network starts at the 14 minute mark! […]
A team of researchers from the National Institute of Standards and Technology (NIST) found that, with just a few tweaks, optical fiber can be used to communicate with the qubits sitting inside superconducting quantum computers, with the same level of accuracy as existing methods.
Unlike the metal wires currently used, it is easy to multiply the number of fiber optic cables in a single device, which means it is possible to communicate with more qubits. According to NIST, the findings pave the way to packing a million qubits into a quantum computer. Most devices currently support less than a hundred. https://products.gobankingrates.com/r/e48f149e71a19f66115d5f5c8edaefd8?subid=
Superconducting quantum computers, such as the ones that IBM and Google are building, require qubits to sit on a quantum processor that is cooled to a temperature of 15 milikelvin – colder than outer space – to protect the particles’ extremely fragile quantum state.
But whether to control the qubits or measure them, researchers first need to communicate with the processor. This means a connection line must be established between room-temperature electronics and the cryogenic environment of the quantum circuit.
Typically, scientists use microwave pulses to communicate with qubits. With different frequencies and durations, the pulses can influence the state of the qubit; or researchers can look at the amplitude of the reflected microwave signal to “read” qubit-based information.
Microwave pulses are normally sent down to the ultra-cold qubits through coaxial metal cables. This comes with a practical problem: sets of metal cables can be used to connect with to up to 1,000 qubits, after which it becomes physically unworkable to build more wiring in a single system.
John Teufel, a researcher at NIST who worked on the institute’s latest research, explains that coaxial metal cables won’t cut it for much longer. “The focus of most real-life quantum computing efforts has been to push forward using conventional wiring methods,” Teufel tells ZDNet.
To address this issue, Teufel and his team at NIST opted to replace metal cables with familiar optical fiber technology, which, based on a glass or plastic core, was anticipated to carry a high volume of signals to the qubits without conducting heat.
Using conventional technology, the researchers converted microwave pulses into light signals that can be transported by the optical cables. Once the light particles reach the quantum processor, they are converted back into microwaves by cryogenic photodetectors, and then delivered to the qubit.
Optical fiber was used to both control and measure qubits, with promising results: the new set-up resulted in accurate rendering of the qubit’s state 98% of the time, which is the same accuracy as obtained using regular coaxial lines.
Teufel and his team now envision a quantum processor in which light in optical fibers transmits a signal to and from the qubit, with each qubit talking to a wire. “Unlike conventional metal coaxial cables, the fiber itself is not the bottleneck for how many qubits you could talk to,” says Teufel. “You could simply give each qubit a dedicated fiber through which to send signals, even for a million-qubit system. A million fibers seems feasible, while a million coaxial lines does not.”
Another advantage of optical cable, notes Teufel, is the information carrying capacity of a single fiber, which is much greater than that of a metal cable. Many more signals – up to several thousand – can be sent through one optical wire, and the scientist envisions separating and re-routing those signals to different qubits in the processor. This would effectively enable a single fiber optic cable to talk to several qubits at once.
The experiment is yet to be carried out. In the meantime, Teufel is confident that all eyes will be on NIST’s latest findings. “Novel wiring methods, like the one we have shown here, will eventually be required to maintain the incredible growth trajectory of quantum computing efforts,” says Teufel.
“We do not suggest that our new method is the only long-term solution, but we are excited to see that this new idea looks incredibly promising. I expect that companies will be looking closely at this work to see if these new methods can be incorporated into their future strategies.”